PIN STYLE LEAD WIRES and CONNECTORS
|
||||||||
The Plugs above plug directly into the TENS or EMS unit. Lead #1 is approx. 1/16" diameter. The other end of the lead wire splits to two 0.08" male pin style connectors to plug into the electrodes. Lead wires are generally 36" long. |
||||||||
-
|
||||||||
SNAP LEAD WIRES
|
||||||||
|
||||||||
ADAPTERS
|
||||||||
Adapters are used to convert older EMS/TENS units with pin style leads (such as Lead #1) to the new FDA compliant connector (Lead #2). If you have a unit that uses the older Lead #1 wires and want to convert to the new FDA compliant wires you will need to purchase an adapter #1 and lead wire #2. |
||||||||
TENS Lead #1 Wires - two 36" lead wires with
four electrode pin connectors (electrodes are not included) These Lead wires
have a 2 mm Mono Plug that leads to two 0.08" Male Pin style connectors and
will work with most Portable EMS and TENS units. $10.00